05-05-2003 02:54 AM - edited 03-02-2019 07:06 AM
Hi,
Can any one suggest the stable running on cat 6509.for both L2 and L3.
please find the sh mod and sh ver of 6509
SM-MB-BSW1> (enable) sh mod
Mod Slot Ports Module-Type Model Sub Status
--- ---- ----- ------------------------- ------------------- --- --------
1 1 2 1000BaseX Supervisor WS-X6K-SUP2-2GE yes ok
15 1 1 Multilayer Switch Feature WS-F6K-MSFC2 no ok
3 3 48 10/100BaseTX Ethernet WS-X6348-RJ-45 no ok
4 4 16 1000BaseX Ethernet WS-X6516-GBIC no ok
5 5 16 1000BaseX Ethernet WS-X6516-GBIC no ok
Mod Module-Name Serial-Num
--- ------------------- -----------
1 SAD053800NE
15 SAD053703HN
3 SAL0540CHXR
4 SAD0540061N
5 SAD053906MA
Mod MAC-Address(es) Hw Fw Sw
--- -------------------------------------- ------ ---------- -----------------
1 00-01-64-15-55-e0 to 00-01-64-15-55-e1 3.2 6.1(4) 6.2(2)
00-01-64-15-55-de to 00-01-64-15-55-df
00-d0-05-4a-a8-00 to 00-d0-05-4a-ab-ff
15 00-07-85-45-a4-40 to 00-07-85-45-a4-7f 1.2 12.1(7a)E1 12.1(7a)E1
3 00-07-4f-69-04-48 to 00-07-4f-69-04-77 5.0 5.4(2) 6.2(2)
4 00-d0-c0-d6-68-f4 to 00-d0-c0-d6-69-03 3.0 6.1(3) 6.2(2)
5 00-d0-c0-d6-5d-74 to 00-d0-c0-d6-5d-83 3.0 6.1(3) 6.2(2)
Mod Sub-Type Sub-Model Sub-Serial Sub-Hw
--- ----------------------- ------------------- ----------- ------
1 L3 Switching Engine II WS-F6K-PFC2 SAD05370755 2.0
SM-MB-BSW1> (enable) sh ver
WS-C6509 Software, Version NmpSW: 6.2(2)
Copyright (c) 1995-2001 by Cisco Systems
NMP S/W compiled on Jun 11 2001, 12:44:26
System Bootstrap Version: 6.1(4)
System Web Interface Version: Engine: 5.3.1 ADP device: Cat6000 ADP Version: 1.5
ADK: 40
Hardware Version: 2.0 Model: WS-C6509 Serial #: SCA054100CS
PS1 Module: WS-CAC-1300W Serial #: SNI05070271
PS2 Module: WS-CAC-1300W Serial #: SNI05360737
Mod Port Model Serial # Versions
--- ---- ------------------- ----------- --------------------------------------
1 2 WS-X6K-SUP2-2GE SAD053800NE Hw : 3.2
Fw : 6.1(4)
Fw1: 6.1(3)
Sw : 6.2(2)
Sw1: 6.2(2)
WS-F6K-PFC2 SAD05370755 Hw : 2.0
3 48 WS-X6348-RJ-45 SAL0540CHXR Hw : 5.0
Fw : 5.4(2)
Sw : 6.2(2)
4 16 WS-X6516-GBIC SAD0540061N Hw : 3.0
Fw : 6.1(3)
Sw : 6.2(2)
5 16 WS-X6516-GBIC SAD053906MA Hw : 3.0
Fw : 6.1(3)
Sw : 6.2(2)
15 1 WS-F6K-MSFC2 SAD053703HN Hw : 1.2
Fw : 12.1(7a)E1
Sw : 12.1(7a)E1
DRAM FLASH NVRAM
Module Total Used Free Total Used Free Total Used Free
------ ------- ------- ------- ------- ------- ------- ----- ----- -----
1 130944K 65576K 65368K 32768K 10805K 21963K 512K 300K 212K
Uptime is 147 days, 20 hours, 26 minutes
Thanks
05-05-2003 04:20 AM
I would make a suggestion of 6.3(10) for the supervisor and 12.1(11b)E4 for the MSFC.
05-05-2003 04:30 AM
I suggest that you read the release notes before making a decision
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/relnotes/index.htm
6.4(3) and 12.1(11b)E11 should be good
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide