10-07-2004 03:45 PM - edited 03-02-2019 07:04 PM
I have a question , when you create a layer 2 vlan on these supervisors where does this information get put ? I don't see it anywhere in the config even though the layer 2 was created . This is in contrast to say a 4506 with sup II plus where if you create the vlan it actually shows up in the running config, i don't see this on the sup 720 . Another question is what is needed to do a complete backup of the config ? Before you just had to do a copy of the running config to the tftp server . Do have to save the vlan.dat files also ? This is our first foray into Native world of the 6500's , we always were running hybrid before . Thanks for your input...
10-07-2004 06:58 PM
The vlan.dat file is in
W2S-3.7-C6509-A#dir const_nvram:
Directory of const_nvram:/
1 -rw- 3376
129004 bytes total (125628 bytes free)
W2S-3.7-C6509-A#
If you have VTP mode set to transparent, the VLANs will be in the running config and hence no need to back up the vlan.dat file. If you have server/client config, you will have to.
10-08-2004 04:55 AM
Thanks prkrishn , this is what i was looking for . It would certainly help a lot if they could just combine everything into the running config instead of having to save the vlan.dat file also .
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide