cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
597
Views
0
Helpful
4
Replies

Troubles with a Catalyst 6506

pgasol
Level 1
Level 1

Hi, I have a catalyst 6506 and I can’t connect to it by console.

The catalyst has a WS-X6K-SUP1A-2GE that has the following leds:

Status in orange

System in green

Active without light

Pwr mgmt in red

Sometimes it boots with all lights in green, but I also can’t connect to it.

What can I do?

Thanks

4 Replies 4

l.mourits
Level 5
Level 5

Sounds like a hardware failure on one of your power supplies.

I don't think so, because the power supplies' lights are green.

Also I'm using the same cable that I used to apply.

I don't think so, because the power supplies' lights are green.

Also I'm using the same cable that I used to apply.

malambert
Level 1
Level 1

Re: not being able to 'connect' via a console.

Depending on the model of SUP, you might need a straight through cable rather than the regular Cisco cable.

Review Cisco Networking for a $25 gift card