08-30-2012 01:28 AM - edited 03-03-2019 06:44 AM
I have a CAB-OCT-V35-FC cable in my Cisco 7200 router and not all of them are utilized. I have to connect another site with a point to point leased line and I am planning to use one of the ports in my Cisco 7200 router which is using the CAB-OCT-V35-FC cable. My problem is both the cable end and the modem is V.35 female connector and both are DCE. I need to build a crossover cable of V.35 male to male which will connect the Cisco 7200 router and the modem. Can anybody help so I can build the crossover cable? I need a pinout to work it out.
08-30-2012 08:05 AM
You can search google for "RS-232 sync pinout".
08-31-2012 05:58 PM
Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
http://www.cisco.com/en/US/products/hw/routers/ps133/products_tech_note09186a00801f5d8e.shtml
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide