cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
889
Views
0
Helpful
3
Replies

VLAN trunk Cisco-HP

scolombo
Cisco Employee
Cisco Employee

We have a customer with an HP 2824 switch which is the "core" of the lan and a cisco 3550Poe which should carry both voice and data traffic.

The cisco has 2 VLAN ( 100,102) for the two kind of traffic . A Gb port on both switch has been configured for trunking ( hp has the TAG term for it ) , however traffic seems not to go through .

Has anyone had the same problems ?

Thanks

3 Replies 3

amit-singh
Level 8
Level 8

You have to maunally TAG each and every vlan on the trunk between the Cisco and the HP switch. One of our client faced the same problem and it got it solved by tagging each vlan on the port connecting to cisco switch.

regards,

-amit singh

We've already tagged each VLAN on the HP switch

Hi ,

solved the problem.

we had to untag the trunk port from the native vlan on the HP switch

thanks all

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: