3750 stacked switch
interface gig 1/0/1
no switchport
no ip address
channel-group 1 mode on
interface gig 2/0/1
no switchport
no ip address
channel-group 1 mode on
interface port-channel1
switchport trunk encapsulation dot1q
switchmode trunk
since this will have 2Gbps trunking link to the core switch, even if 1 link fails other like will still connect with 1Gbps, so is this possible? because i tried this option in the "port-channel1 interface" this command is accepting.
earlier the trunking was configured in the gig 1/0/1, since i wanted more bandwidth, i thought i will put etherchannel.
