Thx for the reply, this is the config
the TPE work only with french language so we have to activate transpac mode.
TPE#show running-config
Building configuration...
Current configuration : 1914 bytes
!
version 12.2
service tcp-keepalives-in
service tcp-keepalives-out
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname TPE
!
enable secret xxxxx
enable password xxx
!
ip subnet-zero
!
!
x29 profile TPE 1:0 2:0 3:0 4:4 5:0 6:9 7:2 8:0 9:0 10:0 12:0 13:0 14:0 15:0 16:13
17:13 18:13 19:0 20:0 21:0 22:0
x25 routing
!
!
interface Ethernet0/0
ip address 128.x.x.x.255.0.0
half-duplex
!
interface Serial0/0
!
interface BRI0/0
no ip address
encapsulation hdlc
shutdown
!
interface Serial1/0
description ## CONNEXION X25 ##
no ip address
encapsulation x25 ietf
no ip mroute-cache
x25 address 113010063
x25 htc 16
x25 suppress-calling-address
!
interface Serial1/1
description "connexion motorolla"
no ip address
encapsulation x25 dce ietf
no ip mroute-cache
x25 htc 100
clockrate 64000
!
interface Serial1/2
no ip address
shutdown
!
interface Serial1/3
no ip address
shutdown
!
ip classless
ip route 172.16.0.0 255.255.0.0 128.128.1.254
ip route 192.20.20.0 255.255.255.0 20.20.20.20
no ip http server
!
!
line con 0
line aux 0
no motd-banner
no exec-banner
exec-timeout 0 0
password xxxx
no flush-at-activation
no activation-character
no vacant-message
modem InOut
autocommand x28 profile TPE verbose debug
transport preferred pad
transport input pad
transport output pad
escape-character NONE
stopbits 1
speed 2400
flowcontrol hardware
line vty 0 4
exec-timeout 0 0
password xxx
login
!
end
TPE#
