cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

4331 Boost License Memory requirements

Bill
Beginner
Beginner

Is additional memory required to use the Boost license on a ISR 4331?

 

We are looking to add the Boost license to an ISR 4331.

I heard that additional memory is required beyond the default 4 Gig that comes with the 4331.

But I cannot find that stated in any Release Notes or other documents.

Is anyone using the Boost license on a 4331 with 4 Gigs of memory?

Thanks

6 REPLIES 6

balaji.bandi
VIP Guru VIP Guru
VIP Guru

I do not believe that you need more memory for boost License install.

But some SD-WAN features may need more memroy.

 

 

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

Flavio Miranda
Advisor
Advisor

hi

 No additional memory needed. You can think about it as if Cisco implemented a "QoS" on the router in terms of performance and with performance license you are disabling the "QoS. ". But the router is already made to support the maximum it can get.

 

 

https://www.cisco.com/c/en/us/support/docs/routers/4000-series-integrated-services-routers/217135-performance-license-on-cisco-isr4000.html 

Joseph W. Doherty
Hall of Fame Master Hall of Fame Master
Hall of Fame Master

As others have already noted, the answer should be no, as all the boost license does is remove the software imposed shaping for all aggregate traffic.

As they also noted, because of the increase throughput, if you do "more" with your traffic than just forward it, it's possible an increased level of throughput might increase memory requirements.  (Again, much would depend on what you're doing.  Two possible simple examples, more traffic flowing through the router might create more ARP entries in the same time period.  Likewise, more traffic through the router might increase the amount of netflow entries in the same time period.)

However, unless you're doing something really unusual, I wouldn't expect there to be any major increase of memory usage, unless, you concurrently, decide to enable some feature you haven't been using.

A good example of memory impact, due to current throughput, before you upgrade your license, might be: compare memory usage at the least busy time of day vs. the most busy time of day.

Bill
Beginner
Beginner

Thanks for all the replies.

The answer appears to be unanimous.

It's not a given that we will be doing this, but if we do I will update this post.
Thanks to all.

No problem post your input..

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help