07-18-2003 07:16 AM - edited 03-02-2019 08:57 AM
Hello,
I have a ATM moudle on 7400 connected to Alcatel DSLam. I am having lot of CRC errors.
anyone has faced this problem?
07-18-2003 12:44 PM
Hello,
which IOS version are you running on your 7400 ? You might want to play around with CRC-16 and CRC-32 cyclic redundancy checking, there might be a mismatch with your Alcatel.
Regards,
Georg
07-31-2003 07:44 PM
Hello.
This what I get from CCO.
The following are some potential reasons for ATM CRC errors:
Dropped cells due to traffic policing in the ATM cloud on one or more VCs attached to the ATM interface.
Noise, gain hits, or other transmission problems on the data-link equipment.
A faulty or failing ATM interface.
For further innfo please go this link.
http://www.cisco.com/en/US/tech/tk39/tk48/technologies_tech_note09186a00800c93ef.shtml
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: