cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
357
Views
5
Helpful
4
Replies
Highlighted
Beginner

ASA 5550 VPN Tunnel

I was having trouble setting up a VPN tunnel coming from my ASA going to a cloud proxy.  When I put the tunnel up I loose connectivity with my test subnets.  I've gone through the config and believe it might be an acl or nat issue.  Anyone care to take a look at my configs? Thanks

4 REPLIES 4
Highlighted
VIP Mentor

How about other side config ? is phase 1 and phase 2 up ?

 

BB

BB
*** Rate All Helpful Responses ***
Highlighted

Well that's the thing the other side of the tunnel is a symantec cloud so it's configured different but as soon as I put in the tunnel and object configs the subnets lost internet reachability.

Highlighted

Hello!

 

You can try changing the ACL and doing a test first, instead of "BlueCoatCloud_traffic any" point only to the Cloud Proxy Ip address and see if this conection works ok.

Please do not forget to rate useful post.

 

 

Best Regards,

 

Highlighted

Sounds good.  This is in our production so I don't want to tinker to much but this should work out fine I'll let you know.

 

Content for Community-Ad