07-12-2018 09:11 AM - edited 03-03-2019 08:51 AM
I was having trouble setting up a VPN tunnel coming from my ASA going to a cloud proxy. When I put the tunnel up I loose connectivity with my test subnets. I've gone through the config and believe it might be an acl or nat issue. Anyone care to take a look at my configs? Thanks
07-12-2018 03:16 PM
How about other side config ? is phase 1 and phase 2 up ?
BB
07-12-2018 08:14 PM
Well that's the thing the other side of the tunnel is a symantec cloud so it's configured different but as soon as I put in the tunnel and object configs the subnets lost internet reachability.
07-13-2018 12:44 PM
Hello!
You can try changing the ACL and doing a test first, instead of "BlueCoatCloud_traffic any" point only to the Cloud Proxy Ip address and see if this conection works ok.
Please do not forget to rate useful post.
Best Regards,
07-13-2018 01:05 PM
Sounds good. This is in our production so I don't want to tinker to much but this should work out fine I'll let you know.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: