Hi folks,After Cisco Live 2020 I decided to boost my learning about Python and I begun to write my first functions and brief code. Now I tried to create a for looping for accessing all Cisco devices included in a list called: device_list but 'm getti...
Forum Posts
Hello Folks, My customer is IPTV broadcasting company, sometimes other provider also use their content to provide the IPTV service for their clients. In order to achieve that goal, we want to put a device (either Router/Switch) to perform MSDP peerin...
Resolved! BGP MED
Please find the attached diagram. Neighborship is formed and Below is the configuration on AS2 router.router bgp 2bgp log-neighbor-changesnetwork 4.4.4.0 mask 255.255.255.0network 192.168.24.0network 192.168.34.0neighbor 192.168.24.2 remote-as 1neig...
Resolved! Connect your VLANs to the router
Bonjour, je fais face à des difficultés dans un laboratoire. J'ai configuré le routeur ainsi que les deux commutateurs, mais lorsque je crée des sous-interfaces sur le routeur, je n'arrive pas à effectuer un ping sur les appareils des autres VLAN. Je...
Can anyone help me by looking at my packet tracer. All the info you need to help me out of a jam is in the packet tracer.Thanks in advance
Resolved! OSPF Query.
Hi, I have a small query.1.1.1.1(loopback)>>Router1>>> Router2 >>>2.2.2.2(loopback).On router 1 when I try to advertise 1.1.1.1 using the below command I don't see any hello packet going out but as soon as I advertise the physical interface(ip) it se...
Resolved! 2-tier and 3-tier LAN architectures
Hello i want to know what's the difference between 2-tier and 3-tier LAN architectures ?? andi want to know we have in the network part 2 tier and 3 tier WAN architectures ?? i wait a reply from architect network Thanks
Hi There, I can't bring up a MPLS TE tunnel with fast-reroute Node Protection, here is the error I get.*Dec 18 21:24:32.537: %MPLS_TE-5-LSP: LSP 2.2.2.2 5_192: DOWN: path errorI attach the headend's configinterface Tunnel5ip unnumbered Loopback0tunne...
Hi I have a question regarding GB switch v 100MB switch.My machine network operates on a 100MB. all network cards are max 100MB.These are connected to unmanaged 100MB switches.If I swap out the 100MB switches for GB unmanaged switch, what are the imp...
Hi, I am testing new Cisco ISR4331/K9 (1RU) for the DMVPN with Fail over solution. Here are some guild lines: Router: ISR4331/K9 IOS: Cisco IOS XE Software, Version 03.15.01c.S - Standard Support ReleaseCisco IOS Software, ISR Software (X86_64_LINUX...
Hi Everyone, Do you know, if the virtual CSR 1000v router supports Local span configuration? - I have configured local span, as I would on any switching platform - Traffic is flowing in and out of the router via interface Gi1 - I want interface Gi2...
Here is the Deal.Our Customer needs to migrate from DC_A to DC_B.DC_A is based on a VXLAN Fabric. My approach is to build a direct Connection between this two Data Center.I used following Hardware: 2x Catalyst C9500 24Y4C2x Cisco 2851 Router1x MGMT W...
Resolved! Modbus TCP/IP connection to IR809G
Good day, Fellow Cisco Friends.I am new to this forum. I need some advice on the IR809G. I have a PLC communicating via Modbus TCP/IP to another Modbus system. My client now wants to include a IR809G to communicate over the local Telecom Service Prov...
When I linked PC12 and PC13 to Switch5, the link always down. version 8.2.1I have attached the file below. Thanks in advance.
Hello and thank you for my time, the thing i need help with is for my CCNA 2 project which is aboutObjective:The objective of this assignment is to design and implement the infrastructure of an Internet Service Provider (ISP) while incorporating vari...
