Hello, Currently our DHCP for VPN users is hosted on our Cisco ASA. We are thinking to move it to our current Windows 2016 Server DHCP. Just trying to see what is the best practice in this regards, should we leave it as is or move it to Windows DH...
Forum Posts
I want to know what port is used when uploading / downloading sitemap to PI. I am sorry that English is not my first language.
Resolved! Inconsistent address and mask
Hi, i have a trouble today i get errors like : %Inconsistent address and mask i try to ip route 10.0.2.0 255.255.252.0 nexthopi dont put next hop but that info was irrelevant But dont work. Any help?
Cisco Adaptive Security Appliance Software Version 9.6(4)8 We're going to change the netmask on two interfaces on a ASA5585x Firewall.These interfaces are critical for a system the runs behind these interfaces,and these system cannot have any downtim...
Hi, When you configure netflow monitor and you dont configure following commands on the interface, For example : vlan configuration 666 ip flow monitor netflow-Monitor input will netflow work ?
my client ask me to setup a QoS for the radios sytem. Does any one has any idea to do the QoS for this ?Thank you
Resolved! BGP for disaster recovery
Hi All, We're currently advertising BPG with two different ISP's and also use BGP for disaster recovery purposes to our private cloud. I'm not entirely sure how that works, would someone be able to provide some insight? I believe that we're only ab...
Resolved! ASA 5506
Hi, I have a ASA 5506 that list show version like: show verCisco Adaptive Security Appliance Software Version 9.8(3)8Firepower Extensible Operating System Version 2.2(2.97)Device Manager Version 7.9(2)152 And another ASA 5506 that list show ver like...
HI all, I understand Meraki now support BGP (beta), this means that when we enable BGP on the uplink which has AUTOVPN enabled so it can now participate in underlay routing on WAN uplink and we can now choose some traffic to go via the underlay and n...
When I do ping is fully succesfully...but when I do traceroute sometimes is fully completed and sometimes not. Which could be the reasons for that the traceroute is completed a few times and sometimes not...
Resolved! Packet Tracer Question
hello ! there is dropdown list in Packet Tracer so that u can create a new scenario !but I cannot find it ! So I cannow proceed with my PT exercize (3.1.1.5 from scalling networks)Could anyone help me find this dropdown menu ? Thanks in advance !
Imagine a user VLAN and tens of users with laptops connected to it.If any of the laptops get infected by a warm or ransomware, it can spread out through the whole user VLAN as these laptops see each other on the single broadcast domain. Generally spe...
Hello guys,I have 2 cases and both of them are fail. When i add red colored configuration into Core router 2.Communication between TDB-server and 192.168.1.100 failedCommunication between Internet-Server and 192.168.1.100 failed This case is same.Wh...
Hi All, I'm pretty new to switches and I've recently purchased a Catalyst 2960s. Although I'm aware this is an L2 switch, I'm pretty sure I can connect several devices to the internet using it (16 I believe, one for each SVI). I'm a few days into att...
Hello,I am using a router/switch `Cisco C1111-8p with IOS XE 16.8`. I couldn't find any information regarding my problem anywhere. I have 3 VLANs:1: native/management 192.168.0.0/2410: dev 192.168.10.0/2450: Guests 192.168.50.0/24 I'd like ...
