Other Network Architecture Subjects

We have 6 Cat3548XL switches connected together in a cluster using gigastack modules. Each of the gigastack interfaces is showing discarded packets in the range of 20 million +. I have found some info on show port command counters for the catos, but ...

two questionsFirst,What is the diffirence between them?one is in global configuration mode, another is in interface configuration mode.second,OSPF authenticationR1---1544K area 0 MD5---R2R1---ISDN area 0 MD5---R2ISDN is for backup.Do I need to confi...

has the following problem been solved•CSCea69933 Symptoms: Asynchronous calls may fail when the ppp callback accept interface configuration command is configured on a network access server (NAS). Conditions: This symptom is observed on a Cisco AS5300...

I have a client who will need routing hardware in their Singapore office mostly for VoIP. They will have a T3 from the US to their Singapore office which will also connect to 5 E1 circuits that will terminate directly into the Singtel network. The go...

I have a cico Router 2600 series and when turn on the Router, i see garbage in the hyperterminal screen by console. my hyperterminl configuration port it´s ok, i have anothers routers here.. and works fine.anyeone can help me.. if exist any way to ...

I am trying to gather some rather specific information about our network. What I am after is a command or report that can tell me how long a port on a switch has been inactive. In our network environment it's quite possible that some ports may be i...

there are no ICONS on URL:http://www.cisco.com/en/US/partner/products/prod_visio_icon_list.htmlfor the WS-C2950T-24any IDEA where i can get this on CCO ?

I have 2 3548XL switches that will occasionally go form normal green blinking to all amber flashes (8 times) then back to green flashes. Console connection will not work, it says "low on memory, try again later. After some time, the switch reboots.

Does anyone use a specific application/database to track ethernet jack to switch port? I am trying to find a decent app that I can use to simplify the management as we currently have about 4 docs that need to be referenced to actually gain any useful...

Can anyone tell me if I can use a single IDS attached to the spanning port to manage / monitor all ports on that switch.John

Does anyone have suggestions on pulling MIB for DFC Processor utilazation? Example: A WS-X6516-GBIC with a WS-F6K-DFC. This 7600 has a Main SUP2/MSFC2 and then each line card has it's own DFC. The DFC has it's own R7000 CPU at 250Mhz allong with ...

Please, no flaming..... We have a load of 5500s in the closets and they are full of dust. Our management wants me to show them documented vendor-specific "preventive maintenance procedures". huh....? I have called Cisco, people just sort of chuc...

I have a CW2k server running LMS at work. When it was first installed and patched with the latest IDU's and updates it worked flawlessly. After a period of time (2 weeks or so) connecting to the server began to slow down. Looking at task manager it w...

Hi all, I have cisco 2503 router,which i am not able to boot,even i am not able to enter in rommon mode.I am sending you the msg which im getting at last.pls find in attachement. pls help me in this regards. santosh