How to copy IOS Image to RSP4 while there is no image in flash card and bootflash, how to use "dnld" command?
How to copy IOS Image to RSP4 while there is no image in flash card and bootflash, how to use "dnld" command?
I've been reading papers on MSFC redundancy on the 6500-series platform. I've got dual MSFC2's with PFC2. I'm getting an inconsistant picture from the articles; do I really need the 'config-sync' command when in single-router-mode? One example has...
I am currently using bgp with two different ISPs. I was under the impression that i could "load balance" outbound traffic with cef? I thought if i enabled it, I could do a per session load balance. Is this incorrect? thanks!-J
Hi,after reset my msfc card (module 15) the card don't boot.After changing IOS and boot image the MSFC don't boot and on supervisor I don't see "ok" but I see "other": 15 1 1 Multilayer Switch Feature WS-F6K-MSFC2 no other Using the command "switch c...
I have feazed by a strange phenomenon for a long period. Hope get a help from here. Through a completed configured 2600 with cisco adsl module ,i can open all websites on Internet except one that are built on an IBM server with solaris OS. ...
I have a terminal server with 12.1(9) running. The output of show hosts doesn't display port numbers. Host Flags Age Type Address(es)s275 (perm, OK) ** IP 10.1.2.1s274 (perm, OK)...
Hi,I have cisco 2600 router with two t1 from single provider.One of t1 provider's tech called and told me that my router is sending high voltage....Does this make sense? Do i have faulty interface??Thank you
Hi ,I would like to simulate internet latency between a client-serverapplication.(adding 200ms)I tried putting 2 routers back-to-back between them but the only thing ihaveavailable is two 1720 with a T1 module . And it does not add muchlate...
hi, i've implemeted dot1x several times and never have i seen this error before:00:43:02: RADIUS: Received from id 47 177.77.3.70:1645, Access-Challenge, len 10200:43:02: Attribute 79 32 015E001E00:43:02: Attribute 24 32 4349534300:43...
Dear All, I have a couple of questions about the NTP output from NTP associations detail:-1) What does "insane, invalid" mean? The server is reachable and a valid NTP sever. Command output attached2) The cisco router is attached to a the NTP sou...
I can't find information about IMA support on 4-port E1 port adapter for 85xx MSR. I see a lot of about 8-port E1 IMA PA, but no word about IMA with 4-port E1 PA.Thank you!
Somebody can tell me what's the different between "session 1" and "session 2" of SPAN technology? Thanks
When I download the latst NAM upgrade, the link says I'm downloading nam-app.3-3-1.bin.gz but the actual file name is nam-app.3-3-1.bin[1].When I try to upgrade I get this error:ftp://172.18.60.6/nam-app.3-3-1.bin[1] (43857K)/tmp/upgrade.gz ...
Due to the Recent Vulnerabilities in Sun JVM. We are forced to upgrade to patched versions or remove Java from all machines.affected platforms areWindowsSDK and JRE 1.4.1_03 and EarlierSDK and JRE 1.3.1_08 and EarlierSDK and JRE 1.2.2_015 and Earlier...
Is it true that Cisco has declared 3661(AC) multiservice router obsolute? If it is true which region are they obsolute? Can a Cisco 3745 multiservice router work in place of 3661(AC). How many asynchronous serial interfaces can it have? Thanks in adv...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:
Subject | Author | Posted |
---|---|---|
02-20-2024 07:45 AM | ||
02-15-2024 09:08 AM | ||
02-14-2024 04:00 AM | ||
11-10-2023 09:28 AM | ||
11-09-2023 09:30 AM |
User | Count |
---|---|
3 | |
3 | |
1 | |
1 | |
1 |