I have a network 10.26.7.0 on SideB connected to SideA via 2 1601R with a HDLC connection. SideA has ip scheme of 10.166.53.0 subnets on both SideA & SideB is 255.255.255.0 The HDLC is 192.168.245.1,2 On SideA we also have a firewall 10.166.53.101. I...
Hi ,Is there any way i can find out Router logged in user information by running snmpwalk command against a Cisco 10008 series router. If it is possible, please let me know know OID.Thanks & RegardsSenthil Kumar
Here is the debug serial interface :HDLC myseq 87,mineseen 87, yourseen 87. I know myseq means the sender, but how to explain mineseen and yourseen correctly? Thanks
Looking for advise or documentation on setting up same subnets on 3640. Trying to set-up remote IP telephone service through 3640, having problems. Talked to maufacture and got propoer set-up. But still having problems with what they say is port forw...
I have a client that recently had a new internet T1 installed in addition to their existing ADSL connection.They purchased a 1721 router with the WIC-1DSU-T1 and a WIC-1ENET.I need to be able to preferably use both connections at the same time for lo...
Our company has just finished evaluating VMS 2.2 on a "test" W2k Server PC. We've purchased a proper server and would like to migrate the database over to the new box. Is there a "best practices" document detailing the steps involved in this move? I'...
What does "spanning-tree optimize bpdu transmission" do? I have searched the 3750 software config guide and the command reference, but in vain. Can anyone explain what it means?
Dear All,We had R1(cisco 3745) & R2(cisco 1721) routers with 2 64kbps Leased line between them.On R1 this links are terminated as 2 diff 64 speed timeslots on Channeslised E1. On R2 these are physically seperate links with RAD modems.This 2 links wor...
i have cisco 770 isdn router .it supports only set based commands.i am using it for internet access . the router is up running . but now i wanted to change existing USER NAME and PASSWORD with new USERNAME and PASSWORD supplied by ISP. how to se...
Hello,I have configured 5 vlans on 6509 switch.By default switch does inter-vlan routing between all vlans.I want to remove one vlan from inter-vlan routing from this switch.I have 720 Supervisor engine and IOS 12.2(SX).How to do this?
Hi,I am running CiscoWorks2000 on a Win/Intel station. Is thre a way to restrict www access to CiscoWorks per IP (like htaccess) or can be done from CiscoWorks configuration?George
Hi AllDoes anybody know what this error message means:Can't flush DM 1 queues 58, status FFA70000 mode FFA7A7FFI get it on a 2924, running IOS version 12.0(5)WC9.The switch gets itself in a total spin because of this. Its management interface stays u...
I experienced a strange behaviour on our 4006 two days ago! In our warehouse we have two 4006 (they are connected with a etherchannel) as a backbone, in the access layer we have a mixture of Cisco, 3Com and Alcatel, In short we will change completly ...
