Hi, I have to test isdn connection between a 1721 and a 1603 router. 1721: manualy call command isdn call int bri0 phonenmber works, but not on 1603.Does anybody now the command for manual call on 1603?Thanks and regardsruedi
Anybody running the 6500 with a Sup720 and having issues of any kind? I know there's only like one or two verions of IOS for it and was wondering how stable it is...
Hi all gurus,I have a 4005 with 24 ethernet 1000 module. The switch connect with an Internet ISA Proxy server 100 Mbps. WHen I set the default route at the switch to the proxy server. The server become down.NB. THere are 2 vlan at the switch. HATO
Dear allWe are facing problems on implementing a BBSM routed environment. I havent understand yet if all clients and network components should be part of the Internal LAN of BBSM. If that is so, what is the use of the routers (all Access Points and c...
Is there a command on a 7507 that Will list all the model #'s and serial #'s of the blades inside it? I have to register it for Smartnet and I need this info.ThanksJoe
If I wanted to know what routes local BGP peer sends to remote BGP peer, I would use "sh ip bgp neighbor a.b.c.d advertised-routes". Unfortunately, this does not really show what exactly is sent: for example if you adjust MED with route map, the "adv...
HiI have a 2520 configured with 2 dialer interfaces. Dialer3 is configured for a dial up to a remote site, and dialer4 is configured for dial in. The problem is that when I add dialer3 to the dialer pool, dialer 4 doesn’t work. Instead I get a debug ...
I have a 2924 Xl Switch and it restarts all of a sudden and also seems to lock up sometimes. It passess all the POST test fine however it simply restarts on its own after a while . Has anyone ever seen this behavior? I have also tried reloading a new...
Hi,I need to permit few users to access internet. Do I have to configure access list to permit for only those users to provide access to internet and call it on NAT.
Hi everyone,I have a client who has a production enviornmet where there is a lot of PC image ghosting via multicast. Is there a best practice on this anywhere.any help would be appreciated.
Because of a building maintenance activity, we had to completely shutdown our network for a couple of hours. After reboot, multicast traffic sometimes stops flowing from application servers to remote clients. Remote clients are connected to 2 Ascend...
Hi all, I have a connection as follows PC-----------R1-----------R2. I can PING from PC to R1 and R2.But the other way around from R1,R2 to PC does not work?? .I can ping the Ethernet Int but then to my PC it does not work???. I have also checked the...
I'm working on a project for a client that has 5 4507Rs & a 6506 switche. There are 3 total VLANS (1-3). Each 4500 has 3-48 port FE blades, each spilt in half;24 to VLAN2 the other 24 to VLAN3. I have setup GB trunks from the 6500 to the 4500s. I ...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:
