Hello,I would like to know if a Cisco 4506 is able to route incoming traffic by itself, without rely to an external Default Gateway.Thank you
Hello,I would like to know if a Cisco 4506 is able to route incoming traffic by itself, without rely to an external Default Gateway.Thank you
I have a router that has no static default route. I would like for this router to get its default route via rip. Problem is, I am getting a total of three default routes. I would like to give one preference, then have a second in case the first is...
Hi,I have a cisco 1750 router with Wic-2A/S and Wic-1B S/T in one of the access location of GTB. The connectivity to Distribution location is via 64 Kbps LL and ISDN backup. The problem is with fastethernet port on the 1750 router. The Fastethernet p...
I have Catalyst 2950. Before port fa0/1 was trunk but now i made it with commandswitchport access vlan 1simple access port. But when i insert cable into port-port dosn't work, don't light-nothing! How to resolve it?----------------------------2950#sh...
When I attempt to telnet to a remote switch, the session skips past the passwords, and in the terminal window I get a message that indicates "bad passwords", then the session terminates. I can log on to the console. I have verified the configuratio...
Hi all, We've had our 7206 up and running for several weeks now, and have begun to implement a more complex design using VLANs. Current config for the interface in question: interface FastEthernet0/0 description ** Link to coresw ** ip address 1...
For an unchannelized E1 G.703 line in a Cisco 3600 for data only:What is the appropriate module ?NM-2CE1UorVWIC-1MFT-E1orVWIC-1MFT-G703Thanks
Tried to upgrade Frame cct to 1024k from 192k but to no avail. Please help..ROM: System Bootstrap, Version 11.0(10c), SOFTWAREBOOTFLASH: 3000 Bootstrap Software (IGS-BOOT-R), Version 11.0(10c), RELEASE SOFTWARE (fc1)AU-SPOTS-1 uptime is 1 hour, 9 mi...
I have Cisco 6500 switch-A trunked to Cisco 6500 switch-B, all vlans are allowed to cross the trunk link.I have a Cabletron SSR8 with a single gigabit connection to one Cisco switch-A and a 100Mbps link from the Cabletron SSR8 to the other Cisco swit...
I have a WS-C2950-24 running c2950-iq412-mz.121-9.EA1.bin software. I've configured a monitor session with these commands:monitor session 1 destination interface F0/2monitor session 1 source interface F 0/8This works partially in that data from F 0/...
Hi,I have a 7206 connected to a 2950 with GE (fiber) and a second fiber connected to a 3500XL. Both links used to be connected to the 3500XL and configured as ISL trunks. Since 2950 only supports 802.1Q, I had to change the config.But I also configur...
At my company, we use ATM to the desktop using ATM LANE via a Centillion 1600 ATM switch. We still have a large amount of machines that are stretching the bandwidth limitations and so we are planning to switch about half of our stations over to Gigab...
Hello all..I've got a tricky question.on a VPDN Scenario: client ------ LAC ------- LNSThe usernames are devided to lets say user#vpn1@company anduser#vpn2@companyLAC based on '@' domain delimiter will send all @company users on LNSis there a way fo...
Hi,in my network,there is a Cat4006 with Supervisor III .There are three vlans(vlan2,vlan3,vlan4) in this switch.Some configurations are following:interface vlan2ip address 192.168.1.254 255.255.255.0interface vlan3ip address 192.168.2.254 255.255.2...
How many SDRAM slots and Flash slots of cisco 3662? if i upgrade SDRAM to 128M, i should order one 64M or two 32M?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
02-20-2024 07:45 AM | ||
02-15-2024 09:08 AM | ||
02-14-2024 04:00 AM | ||
11-10-2023 09:28 AM | ||
11-09-2023 09:30 AM |