Other Network Architecture Subjects

hy,is it possible to abort a traceroute (or extended ping) if i have a connection to a router through a Terminal-Server (line >2032)? the already known "strg-shift-6 x" command brings you back to the Terminal-Server but doesn't abort the traceroute (...

I'm curious about the blade-to-backplane performance of the new 48 port 10/100/1000 blades for the Cat6500 switches. According to the spec sheets, they connect to the backplane in the same way the other 6500 blades do (duh). However, I've heard some ...

Hi AllI have UTLite.exe running on our network. It does work as I can pull username from some PCs, but not all even though these PCs are in the same subnet.Is there a reason why this is happening? I have gone to check those PC where I cannot get user...

We have a Cisco 2501 RouterWhat is difference "show version" and "show process memory" "and show memory" in Router memory ?cisco 2500 (68030) processor 14336K/2048K bytes of memory.2501Router# sh proc memTotal: 15344700, Used: 5800672, Free: 95440282...

I'm trying to enable HA on a switch with two sup2 and MSFC2 Cat OS 7.3(1), but it fails:---Console> (enable) set system highavailability enable Failed to enable system high availability.Feature not allowed while DOT1X is enabled.----There are dot1q t...

Hi,i 'am looking for a complete list of the possible config-reg value settings forcisco router 2600,3600,7200 or probably the settings are all the same for these routers. As far as i know there are 16-bit's for settings and my main problem is to fix ...

I've a LAN composed of 10 2950-C & one core Switch 3550C. Some switches have a double fiber uplink, some other only one.Several time per day (3/4 time) one link is dropped, but it's not always the same one. By disconnecting quickly the uplink's fibe...

Hello. We have connected two 1900 switches (one 24 port and the other 12 port). On the 24 port switch we have configured 2 vlans and vtp as a server - second switch setup as a vtp client. After enabling this configuration, vlans from the first switch...

switch1----switch2------switch3 at this topo,what's the diameter of spt,2 or 3? I think 2 is right,but I am not sure. thanks!

I need to find the properties file that contains the .exe path for telnet when right clicking on a device in topo map? I have looked in ANIServer.properties but cannot find it. I need to change the default app that is launched when telnet is slected ...

Dear all,I have two cat4006 with sup III in my network, the two switches are connected to gether, also interface Vlans are configured on both switches with HSRP configurations. below is a sample of the configurations for the two switches:C4K_Pri#!int...

Is it possible to run simultaneously OSPF and EIGRP on the same router's interface (the interface has two IP addresses from two different IP classes, every routing protocol is using one of the IP classes) without redistributing routes between OSPF an...

I am trying to get a pix 501 connected to a VPN Concentrator 3005 to give out ips leased from our central dhcp server connected to devices via the internal interfaces. This is our setup in the office:Catalyst 4506 with 7 vlans. The DHCP server is on ...