Other Network Architecture Subjects

Hello i have the oppurtunity to re-desing our edge. Currently in our edge it's all private IP space, I'm not sure why it was done like this.I'd like to add public IPs on our border routers, external firewall and our DC(6509s) external interfaces. Our...

We are advertising 192.168.100.0/24 subnet from MY DC Hub location....At othere end I need to apply weight or local-preference for selected IP like 192.168.100.45,  192.168.100.55at both side we are using BGP... is is possible to apply weigh or local...

Hi,At our one location from IP  192.168.81.34  we are trying to access 192.168.17.1 IP in morning , I M not able to access.The tracroute is reaches up to my router IP, then it shows Request time out...continously...After Router my firewall is there &...

Hi all,I'm having problem in exporting list of alarms into a CSV file in Cisco Prime Infrastructure 1.2. When I'm following the guilde in Help as below:To export the list of alarms, follow these steps:Choose Monitor > Alarms.Click the icon on the to...

I recently obtained a 2851 and have been battling this issue for a week now. An odd set of circumstances happen with the bootstrap startup process. If the router has loss of power or when reloaded; it fails to read the CF card and boots to rommon. I ...

        My work has a couple of extra 1811's that I grabbed in hopes of using for my lab.  I upgraded it to 12.4.24.T8, but some of the commands seem different than a 2600 router or 2950 switch.  Are these still viable options to use for a lab, or sh...

Hi allcan anyone tell me the best practice design when looking at internet site to site vpn's as backup to my WAN connections and also remote access vpn connections.My idea is to keep them seperate, i.e have the WAN backups on one device and then hav...

I have a remote site with two Cisco routers. One router has an Internet connection with a VPN tunnel configured back to my hub site and the other router has a frame relay PVC back to my hub site. The remote site PCs are all set up with a default gate...

Hi All,   Does anyone know if Cisco plans to make new Visio stencils? Like for their new BE6000 phone systems?Thanks,Tom

How to configuration on the router?that server voip (IPv4) can connet to the client (IPv6) ?Topologi :

Guys,I have been hearing buzzword in industry related with SDN. What is it all about? And it's future in Cisco timeline and with competitors like juniper.Sent from Cisco Technical Support iPhone App

I'm trying to use this statement on a route-map to an IBGP peer in order to make a particular AS-PATH to appear longer but it doesn't seem to be working.Here's my route-map, which is applied inbound from the neighbor I want to pad. It seems so logica...