Other Network Architecture Subjects

I have a Catalyst 2924XL, running 11.2 (8) - SA6 (highest it will run). All I want to do is to have every port on it running in the same VLAN. I have it hooked to another switch, with that switches port in the VLAN that I want. This works for an o...

Hi When I try and create a sub interface on a 2620 router on Fast ethernet 0/0 I get the followingConfiguring IP routing on a LAN subinterface is only allowed if thatsubinterface is already configured as part of an IEEE 802.10, IEEE 802.1Q, or ISL VL...

Hello,I have some problems when ordering or filtering RR in a the DNS zone dialog box (ressources records tabs). These tasks returns wrong lists (I have A and NS records when filtering with CNAME criteria, some of the RR don't locate at the right pla...

Are there any packages for monitoring and alerting on problems the various components of Ciscosecure ?I would be grateful for any assistance that can be provided .

Hi there,I'm novice to Cisco router, and I screwed up big time with my 1720 router. Flash ROM content was gone.Fortunately, I was able to restore it using xmodem command.The problem is... After downloading the file, it still doesn't boot.Message show...

hi,i have the following question:i have a 1760router with a wic-2t.on serieal ist the trunk in a fr-network.on the second serial line i have a x25-device connected.this router does xot over the fr-trunk to an other router.on the ethernet there are ip...

Hello all!Can you help?When I 'show controller e1 1/1' I get this error : 'far end block detected error'.Yet on the controller e1 1/0 there is no such error. Can anyone tell me what this error is trying to tell me. What do I need to do to rectify it?...

Hello all,on c2500/c1600 the CPU util is not correct calculated. Due to this (known) problem it is very difficult to monitor the real CPU utilization. Does anybody know how to fix (workaround) this issue. On most of the managed routers I do see a CPU...

I made the instalation for NetFlow Collector and NetFlow Analyzer(on HP UX station) and I have some problem with integration. I follow up the information from this link :http://cisco.google.com/cisco?client=cisco&q=cache%3Ahttp%3A%2F%2Fwww%2Ecisco%2...

When i graphicaly display bandwidt using the CMS (revision augus 2002) on a 3524 switch, there seems to be a mis match between displaying the rate in Kbytes en % load.There is also a substatial mismatch in wat is the real bandwith.I tested i on a 2 M...

Only one user dial to the AS5350, the ping successfully 100% from remote user to AS 5350. When another user dial in to it, both users will lose almost all ping packets. I think it's an issue of AS 5350 PRI interface, but can anyone give me a best way...

I am working on a project that the distance between buildings in our MAN requires that we use DSL specifically the 6015 DLAM and the 2621Router(CPE). Our issue is line testing and qualification. We need to verify that our copper loops will perform ...

Is it possible? If I want to run voip and data over a 64/128k link can I implement a QoS policy.TIAGary

hi folks!, We are looking in the market for layer 3 switch with four gigabit fiber ports (SC) and atleast 24 10/100 ports. What product does cisco have with these specs?... or anything close.....Any help is appreciatedThanks!

Im running 2 CAT2948G-L3 with IRB and a gigabit trunk between them. They are both running IOS Version 12.0(18)W5(22b).Snooping traffic from any host connected to one of the fast ethernet ports configured as a bridge port reveals traffic from other ho...