Other Network Architecture Subjects

I've been tasked with recommending a redundant DHCP solution in our corporate building. Here's the layout:16 floors, each with a floor server doing DHCP and F&P for the PC's on that floor. Each floor is it's own subnet (ie. 172.16.6.x, indicates th...

I can't conect to the router at the other end.The Serial Int is up and the FastEt is Up. I can't ping the serial Int at all.There is also a message saying Line Protocol Down, then Line Protocl Up, all the time on the screen.Can anyone help please.Tha...

I would like run SAA for jitter measures over Internet, but for do it is necessary a rtr-responder... so I’m looking for publics rtr-responders in main networksSomeone know any public rtr-responder?ThanksMatias.-

Hi,I'm totaly ignorant about routers configuration/possibilities.I'm using a 3640 router to reach my clients.My software uses X25 with PVC and SVC connections.I'm wondering if it is possible to do VC routing , i.e :- my client is connected to my rout...

Current configuration:!version 12.1no service padservice timestamps debug uptimeservice timestamps log uptimeservice password-encryption!hostname remote!boot system flashenable secret 5 $1$IctH$xbPD9StJ8DdIowwFj0ht/1!username remote password 7 04490E...

Can someone tell me if VLAN/Inter VLAN is supported by Cisco 2500 series routers ? If the answer is "no", what is the next model (Cisco router) with VLAN or Inter-Vlan ?thank you.

I’m running a cisco WS-C3508G-XL-EN with software 12.0(5.4)WC(1) and 4 WS-G5482 1000Base-T GBIC’s connected to and 1 Intel Pro 1000-T (Driver version 2.84.284.0) network Card and 3 3Com 3c996-T Gigabit Copper Cards (Driver Version 1.29).All the PC’s ...

I'm going to be installing a small LAN at my office and I have never used Cisco products before. I do know that they are the best, most powerful, and the only one that I want for my hub/switch. I would like to know if in a LAN with 12 people max, i...

1- As per the great book "Internet Routing Architecture" by Bassam Halabi that it is possible to have multiple eBGP session between 2 routers (page 212-213 , Balancing between 2 router sharing multiple path) . 2- On the other hand , the BGP RFC 117...

We're having problems with a traceroute on a Cisco 2600. Ping works properly to the host we're trying to trace to, but we traceroute just shows timeouts all the through to the max of 30.Any suggestions on how to resolve this would be greatly appreci...

Do you think SPECTRUM the best network management tool around?

HelloThis question might be related more to NT sideI configured vlan on Catalyst 6509 and it is working fine and am routing between it and the main LAN, for the Vlan the computers that are members from it get IP 's from DHCP server while the LAN com...

Hello, I have a subnet of 192.149.1.x/24 and have run out of IPs. So I want to put up an additional subnet of 10.1.23.x/24 so that all the machines can communicate with one another. I have been told by a friend to put up a small 2-port Cisco router. ...

Can I assign more than one IP address for my ethernet interface? If so, how do I do that?Thanks!

I have configured a serial port on my 3640 router with ppp encapsulation, and the remote port on a 1605 with ppp encapsulation. I can telnet into the remote port but I cannot ping it, neither can I ping the local serial port. Please help.