Other Network Architecture Subjects

Dear AllI followed the instruction from the Document "Cisco Branch Router Series (NME-NAM) Installation and Configuration Note, 4.2" and the URL is "http://www.cisco.com/en/US/docs/net_mgmt/network_analysis_module_software/4.2/branch_router/configura...

We are having ds3 link (45Mb)terminated over 7507 router on fa4/1/1 port.Now as it has been terminated over fastethernet port when it goes downstate of fa4/1/1 was up.I want to know how to monitor it through ciscoworks LMS.I want to generatealert whe...

Dear All,I am designing a switch to deliver  the service for data and ip phone.For example the odd number port of a switch  will be assigned for dataand the even number will be for IP Phone. Indeed, the each will have own vlan.I come this solution du...

Can I replace a WS-X6724-SFP DFC3b with a DFC3c?  If so, what is the part number?  At this time, I will even be willing to change the DFC3b to a CFC.Thanks,Tim

Hi,I am trying to obtain more information about the ISG feature on 7200 and 7600 platforms and finding it very difficult to obtain answers from distributors or even Cisco representatives.The main questions are:- How many subscribers include the 7200 ...

Hi Team,I have a problem.I need your assistance on creating manual binding on Cisco IOS v12.2.I have more than 10 vlan with dhcp pools configured according to the vlans and their network range. There are several host that require manual dhcp mappings...

Using a show system command on our switch yielded the result - Peak - 3 %. How can I check what was happening at the time it show 3 %. I ahve gone through the show log and show log buff but nothing.Also the temp-alarm is off, how do i go about enabl...

Hello, Recently we went into upgrade of our cisco 2509's from a 4 meg to 8 meg flash. I got an error message as - "Err: Invalid chip set" . I am running 12.0 IOS code and after this meesage the show version see this new memory stick and every thing l...

I am in the preocess of re-designing my network topology (i.e. routers and switches).  Can anyone tell me where I can find informaton on the best way to do this?Thanks

Hi,on my 7604 router with 720sup I have next trouble. After router reboot it can not be loaded.By DATA-port I recieved following:System Bootstrap, Version 8.4(2) ReleaseCopyright (c) 1994-2005 by cisco Systems, Inc.Cat6k-Sup720/SP processor with 5242...

Hi,I created a test setup with Easy-vpn and DVTI between 2 * 3725.  Although my tunnel comes up  I can't send  a ping from the hub to the spoke . I did some troubleshooting and noticed the following:When I ping from the server at the hub site my pack...