I have a 6506 (720 sup) running IOS version 12.2(18)SXD2. If I remove a module it is not reflected in the config. Is there a way to synch the config with the actual hardware ?
I have a 6506 (720 sup) running IOS version 12.2(18)SXD2. If I remove a module it is not reflected in the config. Is there a way to synch the config with the actual hardware ?
I have a problem loosing connectivity to some switch connected directly to my 2950.I have the mac address in the arp table but when not working the mac-address is not linked to any port in the show mac-address table.Please help
when I create BRI and dialler interface connections on my routers, do i point routes to the local interface of the remote routers interface ?
We have a 6513 with more than 10 IP VLAN interface. We found out the routing between those Vlans doesnt work after we upgrade IOS to Version 12.2(17d)SXB11a. Anyone knows have same experience? Thanks.
Hi all,I would like to modify an extendede ACL on my router which is on production. The ACL has many entries before the last deny any any entry and i have to add new entries to allow my DNS server to communicate with root servers, what's the easiest ...
when I use this command, does it automatically route through it ? how would i put my static routes in this case, would I need 2, 1 for the normal interface and 1 for the backup interface ?cheers
I have a Cisco 837 DSL modem/router, which includes an integrated 4 port switch. On the switch, port 1 is connected to a Linksys WRT54G router, which has my LAN connected to it, along with 13 VOIP phones which use SIP. Port 2 is connected to a Linux ...
I have a question about ARP. I have a number of VLANs configured on a 6500 switch most of the vlans routing interfaces are also on the 6500. One of the VLANS use a static route pointing to a remote router for the routing interface. My question is: A...
As I understand, Auto-RP is like an IGP and MSDP is like an EGP. Is this correct and can you use them together? Has anyone here done so?
Hi all, my serial interface is showing as reset when i do a sh ip int brief , what does this mean ?
My company, like many others, replacing our legacy PBX with Cisco Call manager. My question stems from setting up our new 6509's with Sup32 (IOS) with QOS at the ingress ports. We are setting priority for the obvsious stuff like RTP, control traffi...
Hey all, I saw something that stumped me for a moment today and then got me thinking.A colleague of mine had set up a test lab at work. This was to evaluate a PIX environment, but was nothing too fancy: a couple of host pc's emulating internet-based ...
Hi allhow can i tell when my fallover isdn BRI is being used, what am i looking for when i do an sh isdn status ?
I have three switches in a single VTP domain (I actually have lots but 3 will be for this example) A and B are vtp servers C is a client.I creat a VLAN100 on one switch A, this is propagated to the other switches. I set a port on C to be in VLAN100. ...
I have a problem with the tar file on my cisco switch, how can i download a new one and how do i install it ?thanksCarl
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:
Subject | Author | Posted |
---|---|---|
02-20-2024 07:45 AM | ||
02-15-2024 09:08 AM | ||
02-14-2024 04:00 AM | ||
11-10-2023 09:28 AM | ||
11-09-2023 09:30 AM |