Other Network Architecture Subjects

Trying to copy my config off of my router to a TFTP server. I am typing in the command as follows:WTTKRTR08#COPY STARTUP-CONFIG TFTPand get the following error% Ambiguous command: "COPY STARTUP-CONFIG TFTP "Here is my router type and info:IOS (tm) ...

File "flash:/c2950-i6q4l2-mz.121-22.EA6.bin" uncompressed and installed, entry p oint: 0x80010000 executing... Error: hardware not supported by firmware. Try loading newer software instead. System Resetting...I just delete the previous config.text fi...

I currently have a 6513 chassis that have the following modules, (WS-6416-GBIC, WS-6316-GE-TX, & WS-6348-RJ45). I'm replacing the 6513 switch with a WS-C6509-E chassis, I need to know if my current modules that are listed above will work in the new ...

Guys,I am having some difficulty to understand the SSM boundary config sample from this Cisco doco. eg 1, I am not sure why they have the host 0.0.0.0 line. Also the acl are base on ip, udp and igmp? Eg 2, similar to eg 1 but it also has deny pim. C...

We have Catalysts 6500's that we are migrating to native ios mode, and have noticed in the docs (http://www.cisco.com/en/US/customer/products/hw/switches/ps708/products_configuration_guide_chapter09186a00800da705.html#wp1095579) that vlan configurati...

I am trying to setup L3 routing between a 3550 in our core to a 3560 in another building on our campus. I have set up the routed ports on both the 3550 and the 3560 and the 3560 can ping other resources on the network such as servers, etc. The prob...

I'm trying to setup a new Cat500 24TT. But I'm not be able to save the configuration. I'm using Microsoft Explorer with Microsoft Java VM, and I'm trying to reinstalling original IOS and configuration many times too, but without success.What is it w...

I am getting many mcast and bcast packets on all by 3508 switch Gigabit interfaces. Where do I start to troubleshoot and what commands do I do to find which port is

i have 2 switchs in the same VTP domainand both are in the transparent modei created vlans 2,3,4 on switch1,and created vlans 5,6,7 on switch2,now if i changed the VTP Mode of switch1 to "server" is there any effect on the existing vlans on both swit...

HiI have two networks as belowNetwork 1 = ATM network(Marconi switches) with only vlan 1 created on all switches including Backbone and access being allocated subnet 140.140.x.x/16, which is flats network.Network 2 = 2 core 6500, 3 distrbution 4507 a...

When i start to configured our Cisco 2950 Switch through Consol Cable , is display me this message and rebot again,File "flash:/c2950-i6q4l2-mz.121-22.EA6.bin" uncompressed and installed, entry point: 0x80010000executing...Error: hardware not support...

I have the following message: reliability 255/255, txload 248/255, rxload 40/255 Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 258145That signifies, I have time out when I do ping, that I can do? The complete exit of sh interfac...

i have a 1700 with adsl port. The ethernet port is connected to the OUTSIde ethernet of the PIX. I wanted any traffic that comes to the adsl ATM0 to be redirected to the PIX outside port. what command will accomplish this.Thanks.

my working place is using cisco 2950 manageble switches.one of our switch is using for testing purposes by mobole network poerations devision.they have pluged several mobile equipments like nano BTS....etc using 6 ports of the switch.rest ports are o...

I'm using Hummingbird to connect to 2950's and 3550's via an SSH TELNET connection. Is there a way in CNA 3 to do this? I don't see a method but would like to have a secure gui connection to manage port security on switches.