Please see my Layer 3 VLAN configuration. Can someone please let me know what needs to be done in order to get DHCP IP? Laptop connected to G0/1 for VLAN1XX not getting IP. interface Vlan1XXdescription SRVRVLANip address 10.10.10.1 255.255.255.0no ip...
Forum Posts
Hi, I want to redistribute OMP routes to BGP, i have the doubt if all of the OMP prefixes located in the local vEdge will be redistributed to BGP or just the connected+static networks located in the vEdge. Also how can i restrict some OMP prefixes to...
I have a question for the respected forum. The SD-WAN production environment is usually comprised of more than one SD-WAN controller/manager. Different SD-WAN sites might reside under different controllers/managers. So my questions related to the giv...
Please help me, I encountered an issue Serial is up line protocol is down (disabled) in R-1 router. Router 1 config:- R-1#sh runBuilding configuration... Current configuration : 867 bytes!version 15.1no service timestamps log datetime msecno service ...
Guys, i need som help with subnetting.here is something i dont understand about the subnetting part.Lets say i got a class B address:128.32.0.0 /16I do know that i have 1 network and around 65000 clients.But when i start subnetting, lets say i got th...
Let's say we have two routers configured as RP candidates for auto-RP: R1 - "advertising" its loopback0 interface IP address 1.1.1.1 as the RP for these groups:239.1.1.1/32239.2.2.2/32239.3.0.0/24239.4.0.0/16 R2 - "advertising" its loopback0 interfac...
Resolved! few question about DSCP
Question:1. how it calculates the decimal value from dscp value? For example clearly 101 x= 4 2. how packets is mark with DSCP value? I can see that extended ACL is used to match ip precedence value but how the packet mark at first? is it from the en...
What is the purpose of issuing the "no ip redirects" command on a router interface?
Hello Experts and All Community Members Our users are getting an 'Untrusted server certificate" error when they attempt to use the vpn. I'm trying to enroll a new ca certificate to replace an expired cert. This company uses CLI only not ASDM and I wa...
When I read this whitepaper about NTP design: https://www.cisco.com/c/en/us/support/docs/availability/high-availability/19643-ntpm.htmlIt states that I need to create a detailed design document for the NTP architecture.Does anyone have an example on ...
Hi. I'm setting Catalyst 3650 and would like to know how to set password expiration setting without authentication server like radius.As it doesn't have any authentication servers, password expiration date (password aging time) should be set at Catal...
Hello My ASA 5506 I see that the following certificate ( VeriSign_Class_3_Secure_Server_CA_-_G3) has expired.So I would like to know what is this certificate for? It's really importante to replace it or not ?And how I can renew or remove this certi...
Hi, A customer has asked us to investigate their QOS policy at a particular site which is currently deployed via APIC-EM. The switches are 3650's and the first thing i noticed was under the policy 2P6Q3T the following class; class prm-EZQOS_2P6Q3T#VO...
Resolved! Cisco Fiber to the home GPON
Dears, I am working in a project that are using Fiber to the home (FTTH), I am using Cisco GPON solution, unfortuantely some products are end of life and I can't find replacement for it: 1- ME4624-ONT-RGW ME4600 Indoor RGW ONT with 2xPOTS FXS, 4xFE...
