cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
156
Views
0
Helpful
1
Replies
Highlighted
Beginner

Broad cast control on LAN ????

Hi

I have to diffrent network in my LAN one whisch using private ip and the other is of real ip network.

I have two Vlan on C2950 from this i am connecting internet for these to 2 VLAN(2 network).

i have seen alot of broadcast on my Internet link ,,, genetrated bu these two VLAN...

how can i control there unwanted broadcast on C2950 ,,,, ,,, our LAN ver slow due to the Broadcast.... ,,,

thanks

1 REPLY 1
Enthusiast

Re: Broad cast control on LAN ????

You can use the storm-control feature on the C2950 to trace the source of the broacasts and optionally close the affected port(s).

If your LAN performance is affected by these broadcasts, I suggest you solve the problem at the source rather than on the switch.

Please refer to the following document:

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat2950/12122ea5/2950scg/swtrafc.htm#wp1063295

HTH

--Leon

* Please rate ALL posts.

CreatePlease to create content