cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
133
Views
0
Helpful
1
Replies
smahrous
Beginner

Campus manager cant view Firewall module DMZs

I have a Cisco works machine which is in the outside dmz of a firewall module . All the departments are defined on the dmzs of the module starting from the inside , the problem is that Cisco works machine can not view any information about other dmzs in the firewall module ,

I add the Cisco works machine in the firewall module configuration , but still doesn’t work any suggestions

1 REPLY 1
jsivulka
Contributor

Try a trace to the DMZ. If connectivity is fine, the issue is probably with the firewall blocking traffic that needs to pass through.

You could refer to the doc Troubleshooting Connectivity Problems Using Campus Manager Applications at http://www.cisco.com/en/US/products/sw/cscowork/ps563/products_user_guide_chapter09186a00800d6b7a.html#73848.