Cant Ping the networks in my Wired and Wireless Activity

[kimjereen]

So we were tasked with this packet tracer activity. Recreate the topology, fill in the IP addresses, and connect the cables. All of my wires are connected, and I've entered the addresses listed below, but during 

Part 4: Verify Connections

I was unable to ping the following addresses. I'm not sure if the IP addresses, gateways, or the DNS are incorrect or not. Please help. I've been attempting to solve them for nights and it's still not working. 

this is what I've done so far...

below is my activity and packet tracer file.

[Flavio Miranda]

Hi

 Identified some points to make right but honestly, did not solve entirely yet. 

Router 0 needs to have route to 192.168.1.0, otherwise it can reply DHCP requests.

Router WRT has a Typo on the IP address.

the Cloud is using DSL on the interface and I think it should be Cable.

But, Router0 still does not ping WRT en this is the problem for now.

Try to look after this.