cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
585
Views
0
Helpful
3
Replies
Highlighted
Beginner

Cat6k boot problem

I've next message during boot-

System Bootstrap, Version 8.1(3)

Copyright (c) 1994-2004 by cisco Systems, Inc.

Cat6k-Sup720/SP processor with 524288 Kbytes of main memory

Autoboot executing command: "boot disk0:"

PCMCIA slot0 device is not initialized

open: read error...requested 0x4 bytes, got 0x0

trouble reading device magic number

boot: cannot open "disk0:"

boot: cannot determine first file name on device "disk0:"

Exit at the end of BOOT string

rommon 1 >

rommon 1 > dir disk0:

PCMCIA slot0 device is not initialized

open: read error...requested 0x4 bytes, got 0x0

trouble reading device magic number

dir: cannot open device "disk0:"

How to resolve it?

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Advisor

Re: Cat6k boot problem

You might have to try out the procedure in the following URL to get the box back:

http://www.cisco.com/warp/public/473/14.html

Hope that helps - pls rate the post if it does.

Paresh

View solution in original post

3 REPLIES 3
Highlighted
Engager

Re: Cat6k boot problem

Highlighted
Advisor

Re: Cat6k boot problem

You might have to try out the procedure in the following URL to get the box back:

http://www.cisco.com/warp/public/473/14.html

Hope that helps - pls rate the post if it does.

Paresh

View solution in original post

Highlighted

Re: Cat6k boot problem

Broken link. Kindly update link please.