catos config register

[g.rodegari]

Hi all,

if I configure the 6500 catos configuration register with:

- 0x02

- 0x2102

- 0x102

are the same ?

thank you,

G.

[pasco]

By cisco docs:

at RouteProcessor(MSFC) with Catos:

0x102

at Native IOS:

0x2102

[ankurbhasin]

Hi,

You should be only concerned with last number which ideally should be "2 to f" which decide where to boot from so if your last number is anything between "2 - f" you are good to go as the other numnbers are concerned with console baud rate and other things.

HTH

Ankur