Re: cisco 3550 gbic problem

oddonepaolo · ‎08-13-2002

hi

i have a catalyst 3550. i hev also a gbic

i have put the gbic in a frre slot and on boot i have

00:00:34: %GBIC_SECURITY-4-VN_DATA_CRC_ERROR: GBIC interface Gi0/1 has bad crc

00:00:34: %PM-4-ERR_DISABLE: gbic-invalid error detected on Gi0/1, putting

Gi0/1 in err-disable state

my gbic is :

cisco systems 30-0759-01 1000BASE-SX.

i have tried to upgrade ios to the latest version without results.

Why on another catalyst 3500 the gbic seems work well?

bye

s.lemberg · ‎08-13-2002

hi,

please read ( look for : PM-4-ERR_DISABLE) :

the next question :

did you try this gbic with another switch ?

regards

sascha

oddonepaolo · ‎08-13-2002

yes i have sent gbic to a friend. he say that no errors on boot, but gbic seems a lx type..... it seems strange.

i have read your link and gbic seems to be not supported...

my model of gbic is 30-0759-01 1000BASE-SX.

note: i have open a case with tac and i have uploaded the new ios. how can i see if gbic is supported for my model?

thank you.

efrahim · ‎08-15-2002

Release- note can tell you if the GBIC is supported or not. By the way, LX is supported

oddonepaolo · ‎08-16-2002

the gbic seems to be supported. but if i select GBIC from software advisor at http://www.cisco.com/cgi-bin/front.x/Support/HWSWmatrix/hwswmatrix.cgi

i can't see c3550 why?

efrahim · ‎08-16-2002

Thanks for pointing, It is not updated, it is not even showing Cat6000- It is always best to check the release note.