10-20-2014 07:48 AM - edited 03-03-2019 07:37 AM
Hi everybody,
I have a little problem understanding this article: http://www.cisco.com/c/en/us/support/docs/routers/10000-series-routers/50421-config-register-use.html
If I want, the Router, to boot the IOS from for example tftp://192.168.0.1/NAME.xyz AND the Router should not load any configuration file, what do I have to type?
And... How does this work, because the router does not have a configured IP Interface, how can it fetch this file from tftp?
Thanks for your help.
10-22-2014 07:28 PM
Ahhhhh ... TFTP boot. I've never seen this work, frankly.
10-24-2014 01:32 AM
Obviously there are two different ways doing this.
Via Config reg and netboot (default filenames)
And this howto: https://supportforums.cisco.com/blog/150396/booting-cisco-router-tftp-server
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide