cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1085
Views
0
Helpful
5
Replies

Cisco Design on 9300 with 10G Uplinks

avilt
Level 3
Level 3

I need 9200 L2 and 9300 L3 series switches all with 10Gbps uplink ports as shown in the diagram.

Please let me know if its possible as per the attached diagram,all uplinks from  9200 to 9300 L3 switch should be 10Gbps.

Also let me know the maximum possible 10G ports on 9300 core switches.

1 Accepted Solution

Accepted Solutions

So how many switch stacks will need uplinks to the 9300?
C9300-NM-8X has 8 x SFP/SFP+ ports (per unit).
If there is only 3 stacks, then C9300-NM-8X is sufficient.

View solution in original post

5 Replies 5

Leo Laohoo
Hall of Fame
Hall of Fame
9300 can support up to 8 x SFP+ using C9300-NM-8X.

Any limitations with this design?

I am using 2 x 10G up links from each L2 switch to L3 Stack using LACP. 

And how many L2 switches do you have?

3 stacks each with 2 switches as shown in the diagram. Also firewall in HA pair.

So how many switch stacks will need uplinks to the 9300?
C9300-NM-8X has 8 x SFP/SFP+ ports (per unit).
If there is only 3 stacks, then C9300-NM-8X is sufficient.
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco