Cisco Design on 9300 with 10G Uplinks

[avilt]

I need 9200 L2 and 9300 L3 series switches all with 10Gbps uplink ports as shown in the diagram.

Please let me know if its possible as per the attached diagram,all uplinks from  9200 to 9300 L3 switch should be 10Gbps.

Also let me know the maximum possible 10G ports on 9300 core switches.

[Leo Laohoo]

9300 can support up to 8 x SFP+ using C9300-NM-8X.

[avilt]

Any limitations with this design?

I am using 2 x 10G up links from each L2 switch to L3 Stack using LACP. 

[Leo Laohoo]

And how many L2 switches do you have?

[avilt]

3 stacks each with 2 switches as shown in the diagram. Also firewall in HA pair.

[Leo Laohoo · Accepted solution]

So how many switch stacks will need uplinks to the 9300?
C9300-NM-8X has 8 x SFP/SFP+ ports (per unit).
If there is only 3 stacks, then C9300-NM-8X is sufficient.