cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
559
Views
0
Helpful
7
Replies
Beginner

Clock time issue in c3560 Logs:

Hi my name Izhar,
I am facing the issue with C3560 switch.
i have set the clock which is showing correctly but in Logging it's getting the incorrect time.
please any one help.

acc-ingles-up-00#sh clock
10:08:36.366 UTC Thu Jul 5 2012

below the logs :

1y8w: %LINK-3-UPDOWN: Interface FastEthernet0/12, changed state to down
1y8w: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/4, changed state to down
1y8w: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/4, changed state to up
1y8w: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/4, changed state to down

Everyone's tags (2)
1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Community Legend

Clock time issue in c3560 Logs:

Can you please mark this thread as "Answered"?

7 REPLIES 7
Hall of Fame Community Legend

Clock time issue in c3560 Logs:

Try this:

conf t

serv time d d s l

serv time l d s l

clock timezone WORD

clock summer-time WORD DST_SETTINGS

end

Beginner

Clock time issue in c3560 Logs:

Hi Leolaohoo,

thanks for your support, have configured as you told but still it's not resolved.

acc-ingles-up-00(config)#service timestamps debug datetime show-timezone local timestamp

1y8w: %SYS-5-CONFIG_I: Configured from console by mhaque on vty0 (172.xx.xx.xx)

Hall of Fame Community Legend

Clock time issue in c3560 Logs:

serv time l d s l

You forgot this line.

Beginner

Re: Clock time issue in c3560 Logs:

Thanks for your help...

the issue get resolved....

      

I had tried the command but after that the issue was not resolved.

I have used the below command to fix it:

switch(config)#service timestamps log datetime

Hall of Fame Community Legend

Clock time issue in c3560 Logs:

Can you please mark this thread as "Answered"?

Hall of Fame Community Legend

Clock time issue in c3560 Logs:

I had tried the command but after that the issue was not resolved.

I have used the below command to fix it:

switch(config)#service timestamps log datetime

The command I recommend you use last "serv time l d s l" is the "shortcut" of this command you're using.

Thanks for the ratings. 

Beginner

Clock time issue in c3560 Logs:

Thanks again.......

CreatePlease to create content
Content for Community-Ad
July's Community Spotlight Awards