02-19-2003 08:41 AM - edited 03-02-2019 05:12 AM
I have to configure some 256 K and 384 K circuits.. nothing special simply HDLC.
I have purchased a WIC-1DSU-T1 which is supposed to a CSU integrated into the IOS. What specific commands do i use to configure this module and slice out the proportionate number of channels for my 256K and 384K circuits..
02-19-2003 08:55 AM
You can use the "service-module timeslots " interface command.
For more info, visit
http://www.cisco.com/warp/public/471/61.html#command
http://www.cisco.com/warp/public/471/52.html
Hope that helps!
02-19-2003 07:15 PM
Yes you set the service-module t1 timeslots 1-4 for the 256k links. And 1-6 for 384. the other important info is the framing ( esf or sf ) and linecode ( b8zs and ami respectivly) other than encapsulation type and no shutdown will bring up your interface.
happy routing.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide