conifiguring a FRACt-1 1600 series

[Kevin Melton]

I have to configure some 256 K and 384 K circuits.. nothing special simply HDLC.

I have purchased a WIC-1DSU-T1 which is supposed to a CSU integrated into the IOS. What specific commands do i use to configure this module and slice out the proportionate number of channels for my 256K and 384K circuits..

[thisisshanky]

You can use the "service-module timeslots " interface command.

For more info, visit

http://www.cisco.com/warp/public/471/61.html#command

http://www.cisco.com/warp/public/471/52.html

Hope that helps!

[gschertz]

Yes you set the service-module t1 timeslots 1-4 for the 256k links. And 1-6 for 384. the other important info is the framing ( esf or sf ) and linecode ( b8zs and ami respectivly) other than encapsulation type and no shutdown will bring up your interface.

happy routing.