cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
122
Views
3
Helpful
2
Replies
Highlighted
Beginner

Custom Report

Is there a way within CiscoWorks to produce a report that shows what ports on a switch are active and what Cisco devices might be attached. Some type of CDP relationship.

Thanks in advance

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Hall of Fame Guru

Under CiscoWorks Campus Manager, the User Tracking tool can be used for that. Assuming your Cisco devices are in DNS and have names formed according to a convention you use, open up user tracking and sort by host name.

View solution in original post

2 REPLIES 2
Highlighted
Hall of Fame Guru

Under CiscoWorks Campus Manager, the User Tracking tool can be used for that. Assuming your Cisco devices are in DNS and have names formed according to a convention you use, open up user tracking and sort by host name.

View solution in original post

Highlighted
Contributor

These are really two different functions found in Campus Manager (CM).

The first "shows what ports on a switch are active", you'll need to use CM> User Tracking when it finishes loading you can sort by device (click on device tab) and it'll show what ports have connectivity.

The second "what Cisco devices might be attached", you'll use CM> Topology Services> View> Display View.

This will show all devices and how they interconnect (Layer 2).

Content for Community-Ad