07-17-2006 01:35 AM - edited 03-03-2019 04:04 AM
Hi
I've got a dhcp service running on one of our routers (3640). Thew config is pasted below:
ip dhcp pool se
network 10.11.8.0 255.255.248.0
bootfile /linux-install/pxelinux.0
next-server 10.11.9.38
default-router 10.11.9.23
domain-name se.example.com
dns-server 10.11.9.11 10.11.9.22
lease 10
My question is that I would like to see which leases have been issued and to what mac addresses, how can I do that?
Thanks in advance
Dan
07-17-2006 01:58 AM
Hello Dan,
I assume you already tried issueing show ip dhcp server statistics, however this does not produce which client released a binding.
To do so, you can use debugging. This increases the load on your router which, thus not a proper solution.
Router#debug ip dhcp packet
I am not shure if there is a snmp trap for dhcp service. You can check the MIB browser if you can read MIB values to accomplice your goal.
HTH
--Leon
* Please rate posts.
07-17-2006 02:00 AM
Hi Dan,
Try this
show ip dhcp binding
HTH, if yes please rate the post.
Ankur
07-17-2006 02:08 AM
Hi
The command is
"show ip dhcp bindings"
which will show the ip address,mac-address,lease time.
Regards
JD
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: