cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Difference between WS-X6066-SLB-S and WS-X6066-SLB-APC

grischast
Beginner
Beginner

Dear all

I have two 6509 chassis with Sup720 and MSFC3.

Additionally I have one module

"CSM with SSL"   WS-X6066-SLB-S-K9  Hw. 1.2, Sw. 2.2(1)

and one module

"SLB Application Processor Complex"  WS-X6066-SLB-APC Hw. 1.6, Sw. 4.3(1)

I am searching the Cisco site up and down and cannot really tell the difference between these modules.

So what's the difference?

And would it be possible to run the same software on both CSM modules?

As far as I see 4.3(5) is the latest release for the WS-X6066-SLB-APC, but what about the WS-X6066-SLB-S-K9?

Thanks for any hints,

Grischa

1 REPLY 1

Jon Marshall
VIP Community Legend VIP Community Legend
VIP Community Legend

grischast wrote:

Dear all

I have two 6509 chassis with Sup720 and MSFC3.

Additionally I have one module

"CSM with SSL"   WS-X6066-SLB-S-K9  Hw. 1.2, Sw. 2.2(1)

and one module

"SLB Application Processor Complex"  WS-X6066-SLB-APC Hw. 1.6, Sw. 4.3(1)

I am searching the Cisco site up and down and cannot really tell the difference between these modules.

So what's the difference?

And would it be possible to run the same software on both CSM modules?

As far as I see 4.3(5) is the latest release for the WS-X6066-SLB-APC, but what about the WS-X6066-SLB-S-K9?

Thanks for any hints,

Grischa

Grischa

They are both load-balancing modules but the WS-X6066-SLB-S-K9 is capable of load-balancing SSL as it has a inbuilt SSL daughter card which the WS-X6066-SLB-APC does not.

No the same software is not run on both modules, the latest version of the CSM-SSL module (WS-X6066-SLB-S-K9) is 2.2(5).

Jon

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: