Re: E1 linkup trap for 5300 access server

mustafa.mail · ‎10-18-2002

Hi,

I am using 5300 access router. I configured following globle commands for snmp:

snmp-server community <removed> RO

snmp-server community <removed> view v1default RO

snmp-server community <removed> RO

snmp-server trap-source FastEthernet0

snmp-server enable traps snmp linkdown linkup

snmp-server enable traps rtr

snmp-server host 192.168.180.69 <removed> snmp

After these commands I get linkdown traps but i didn't get linkup traps. I need a linkup traps for E1 interfaces.

Please help me..

Thanks.

rmushtaq · ‎10-19-2002

What IOS version are you using?. If you a no shut on the E1, does the Trap PDUs field in the sh snmp output increment?. You may also want to do a Bug Toolkit search to see if you're hitting any known bugs.

mustafa.mail · ‎10-20-2002

I am using 12.2(7c). I chacked Trap PDUs field in the sh snmp output are not increse.

Thanks.

rmushtaq · ‎10-20-2002

Then you should first search the CCO Bug Toolkit to see if this is a known issue.

mustafa.mail · ‎10-21-2002

I din't get anything from bug toolkit..Is it configuration related problem. Is it any specific snmp trap command for E1 controller?..