Has anyone successfully implemented epvn/mpls between asr1001 and asr9000. My test setup is following:
Two asr9000 connected to each other with few working bridge domains configured. Software is 6.7.2
Two asr1001 (Fuji 16.9.6) are bit connected to one asr 9000 and have one bridge domain configured that already exists and it is fully tested on asr9000.
Ospf in single area with loopback for ospf, mpls and bgp.
Asr1001 are RR clients and Asr9000 are RR with different cluster id.the problem i am having is that i can see all mac address form the bridge domain on all 4 routers. However, ping and arp work between hosts connected to asr1001 and hosts connected to asr9000 but hosts on asr1001 can't see nor ping hosts on asr9000.
Listen: https://smarturl.it/CCRS9E25 Follow us: twitter.com/ciscochampions
With applications and users everywhere, the networks are now, more than ever, being tasked with delivering consistent protection while providing an exceptional user exper...
Listen: https://smarturl.it/CCRS9E24 Follow us: https://twitter.com/CiscoChampion
Cisco Radio Aware Routing addresses several of the challenges faced when merging IP routing and radio communications in mobile networks, especially those exhibiti...
Listen: https://smarturl.it/CCRS9E23 Follow us: https://twitter.com/CiscoChampion The Wi-Fi 6E Catalyst 9136 access point takes advantage of the 6-GHz band to produce a network that is more reliable and secure, with higher throughput, more ...
When moving from OSPFv2 to OSPFv3, there are many changes in the format of the LSAs Type, but the most known changes are: IP prefix informations are no longer carried in Type-1 LSA and Type-2 LSA, new LSAs Type 8 and 9 are added to carry these prefixes.