cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
485
Views
0
Helpful
1
Replies
Highlighted

FR End To End KeepAlive Vs ATM OAM

Hi,

Actually we have an infrastructure like the one that is represented in the image below.

FR Vs ATM Architecture AS-IS.jpg

The Local Router has two TGU's with DLCI 20. The Remote Sites can be connect to one TGU or to another one.

On both Sites we have the End To End KeepAlive to make an ISDN to be ready when the FR link goes down.

We need to migrate the actual infrastructure to a E3 - 34mbps link over ATM and the Architecture will become the follow:

FR Vs ATM Architecture TO-BE.jpg

In This way the TGUs will "collapse" in the new 34mbps ATM link.

The ISP in this architecture needs to "switch" ATM/FR Packets between the Local Router Vs Remote Routers.

Now the question...the doubt...


If We enable the OAM on the sub-interfaces that we'll create on the Local Router (one for each remote router), the "compatibility" between the EEK and OAM is effective?

1 REPLY 1
Highlighted
Hall of Fame Master

There is no support for end-to-end keepalive in ATM/FR inteworking.

Note,  ATM and FR are both are obsolete techonolgies today. You should look for a pure IP solution, e.g MPLS for best results.