cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
15713
Views
30
Helpful
19
Replies

Help on VxLAN EVPN Configuration on Catalyst 9500-32C

Aaron D
Level 1
Level 1

Attempting to configure VxLAN EVPN on a pair of Catalyst 9500-32C's for a Proof of concept. No joy so far. Been referencing these links:

https://community.cisco.com/t5/data-center-blogs/vxlan-evpn-configuration-example-n9k-p2p/ba-p/3663830

https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9500/software/release/16-10/configuration_guide/lyr2/b_1610_lyr2_9500_cg/configuring_vxlan_bgp_evpn.html

BRKDCT-2949. 

Any suggestions? 

Main goal is to bridge a single VLAN and have 2 hosts communicate across the VTEPs. 

19 Replies 19

yes i think they are layer 3 interface, but you could use loopback address. it does not matter

Hi Everyone,

I'm also trying to achieve this configuration. Has anyone ever run into the following error when trying to configure the NVE interface?

% Can't configure L2DP VNIs on NVE interface with CP or CP VNI configured

More specifically I get this when trying to configure the "member vni 11001 ingress-replication"

Thanks

Tim

 

Never received these warnings I thing something is different in your setup

Figured it out - Catalyst 9K is the minimum hardware platform I was on a 3650 with DNA Advantage Licensing and 16.12.2. Once I swapped to 9300 - worked straight away.

Happy to help

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: