11-01-2002 01:21 PM - edited 03-02-2019 02:34 AM
What is the best and cheepest way to do a traffic analysis over a Serial Point-to-Point link on a 3661 ver 12.0, router's WAN interface over a period of 24 hours?
11-01-2002 01:24 PM
ip accounting would do fine. But it does consume cpu resources. Check show process cpu before and after enabling ip accounting.
There have been a few other posts, similar to this, in this same section. You might want to check the configs there too..
11-03-2002 02:41 AM
Hi, You can use MRTG..It's free and you can trace the utilization of link ..
11-03-2002 05:59 AM
Thanks, but what's MRTG.
11-04-2002 07:01 AM
http://people.ee.ethz.ch/~oetiker/webtools/mrtg/
BTW: Google is your friend.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: