How to restore a Cisco 1841

[stefano.branca]

Hi guys,

to reset a cisco 1841 tofactory settings, we enter in rommon interface and by mistake we used confreg 0x024 instead of 0x2142.

After the reboot I'm not able to read the carachters, looks like to be on wrong serial speed, but it isn't.

Do I need to trash it ?

 

[SANTHOSHKUMAR SARAVANAN]

Hi ,

 Try with different console speed . You should be able to see the characters .

http://www.cisco.com/c/en/us/td/docs/routers/access/1800/1841/software/configuration/guide/sw/b_creg.html#wp40498

Table 4 Console Line Speed Configuration Register Bit Combinations 

Bit 5	Bit 11	Bit 12	Console Line Speed (baud)
1	1	1	115200
1	0	1	57600
1	1	0	38400
1	0	0	19200
0	0	0	9600
0	1	0	4800
0	1	1	2400
0	0	1	1200

HTH

Sandy