cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
283
Views
0
Helpful
4
Replies
Highlighted

HRSP Unknown Standby Router, Both Routers Active

Hi Guys,
I found some problem in my lab.
When I attach switch between two routers.

Everyone's tags (2)
4 REPLIES 4
Highlighted
VIP Advisor

Re: HRSP Unknown Standby Router, Both Routers Active

Hi there,

It looks as if the routers have no communication between themselves on VLAN7. 

What is the output of:

sh spanning vlan 7 

...on both distribution switches?

 

cheers,

Seb.

Highlighted
Enthusiast

Re: HRSP Unknown Standby Router, Both Routers Active

Make sure vlan 7 which having issue should passover the link directly connected to each other or the link connected via downstream access switch should pass the vlan 7. Also check the interface vlan 7 configuration on both L3 devices make sure the interface vlan 7 should have a unique IP address at both devices.

 

Please rate for helpful post

Highlighted
VIP Mentor

Re: HRSP Unknown Standby Router, Both Routers Active

make sure VLAN7 streached across network and also see vlan 7 blocked any where in spanning tree ?

 

BB
*** Rate All Helpful Responses ***
Highlighted
Hall of Fame Master

Re: HRSP Unknown Standby Router, Both Routers Active

I agree with the other responses that there seems to be some issue about vlan 7 between these switches. In circumstances like this I find it helpful sometimes to do show cdp neighbor on both switches. Would you post that output? We are especially looking to see if the switches see each other as neighbor on the other vlans but not on vlan 7.

 

Is vlan 7 carried between these switches on a trunk with multiple vlans or is the connection for vlan 7 on access ports? Would you post the output of show interface trunk from both switches?

HTH

Rick
This widget could not be displayed.