04-24-2020 06:02 AM
Hello community,
Who can help me?
In this lab on packet tracer, in cant ping from pc0 and pc1 to the Server or the domain.
What i configured wrong?
Solved! Go to Solution.
04-24-2020 08:49 AM
Hi @Mailson
With the show interfaces command, you can verify that the fa0/1 interface is not obtaining DHCP addressing.
This is because the cloud settings are incorrect.
To correct this, make these changes:
Go to the cloud> configuration> Ethernet6 and switch to the cable:
Then go to cloud> configuration> Cable and press Add to add the connection between these interfaces:
After these changes, the fa0/1 interface gains DHCP addressing and connectivity is successful.
Regards
04-24-2020 06:14 AM
Hi @Mailson
I notice that you are missing a default route.
This is necessary for the router to have a route to unknown networks (internet).
Try this:
Router(config)# ip route 0.0.0.0 0.0.0.0 fa0/1
Regards
04-24-2020 06:52 AM
04-24-2020 07:52 AM
04-24-2020 08:49 AM
Hi @Mailson
With the show interfaces command, you can verify that the fa0/1 interface is not obtaining DHCP addressing.
This is because the cloud settings are incorrect.
To correct this, make these changes:
Go to the cloud> configuration> Ethernet6 and switch to the cable:
Then go to cloud> configuration> Cable and press Add to add the connection between these interfaces:
After these changes, the fa0/1 interface gains DHCP addressing and connectivity is successful.
Regards
04-24-2020 09:06 AM
U are the best
Thank you again
problem solved!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: