04-24-2020 06:02 AM
Hello community,
Who can help me?
In this lab on packet tracer, in cant ping from pc0 and pc1 to the Server or the domain.
What i configured wrong?
Solved! Go to Solution.
04-24-2020 08:49 AM
Hi @Mailson
With the show interfaces command, you can verify that the fa0/1 interface is not obtaining DHCP addressing.
This is because the cloud settings are incorrect.
To correct this, make these changes:
Go to the cloud> configuration> Ethernet6 and switch to the cable:
Then go to cloud> configuration> Cable and press Add to add the connection between these interfaces:
After these changes, the fa0/1 interface gains DHCP addressing and connectivity is successful.
Regards
04-24-2020 06:14 AM
Hi @Mailson
I notice that you are missing a default route.
This is necessary for the router to have a route to unknown networks (internet).
Try this:
Router(config)# ip route 0.0.0.0 0.0.0.0 fa0/1
Regards
04-24-2020 06:52 AM
04-24-2020 07:52 AM
04-24-2020 08:49 AM
Hi @Mailson
With the show interfaces command, you can verify that the fa0/1 interface is not obtaining DHCP addressing.
This is because the cloud settings are incorrect.
To correct this, make these changes:
Go to the cloud> configuration> Ethernet6 and switch to the cable:
Then go to cloud> configuration> Cable and press Add to add the connection between these interfaces:
After these changes, the fa0/1 interface gains DHCP addressing and connectivity is successful.
Regards
04-24-2020 09:06 AM
U are the best
Thank you again
problem solved!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide